Podcast.
From Makers to Hackers – Lessons from Maker Faire Salzburg
At Maker Faire Salzburg, I discovered that the maker and hacker mindsets share the same DNA — curiosity. This reflection explores what unites them and why ethical curiosity matters.
Into the Kernel — Writing, Debugging & Cross-Compiling My First Character Driver
I share how I built, debugged, and cross-compiled my first Linux character driver for the Raspberry Pi — and what kernel programming taught me.
Hello Kernel – My First Steps into Embedded Linux
Season 2 kicks off with a deep dive into Embedded Linux and Kernel Driver Development — setting up a Linux environment, understanding kernel space, and writing a first "Hello Kernel" module.
From Breadboard to First Data: Debugging, Enclosures & a Test Drive
How I took my Feather RP2040 telemetry logger off the breadboard, wrestled with soldering and wiring issues, designed a first enclosure, and finally logged real GPS data in the field.
From Zero to Flight-Ready: Logging Data with CircuitPython on the Feather RP2040
How I set up the Adafruit Feather RP2040 with CircuitPython, logged data from the BME280 and GPS, and finally got reliable SD card logging for my drone telemetry project.
When the SD Card Won: Why I Switched to CircuitPython for My Drone Telemetry Project
After weeks of fighting SD card logging on my STM32, I decided to pivot. Here’s why CircuitPython on the RP2040 is now powering my DIY drone telemetry logger.
A Maker’s Journey – Episode 3: Untethered Embedded & GPS Adventures
Join me as I untether my embedded development with a new wireless setup, battle C++ libraries, navigate UART conflicts, and finally get a solid GPS fix for my drone telemetry system!
A Maker’s Journey – Episode 2: STM32, Debugging & BME280 Sensor Data
Getting started with embedded systems on STM32: from blinking LEDs to reading BME280 sensor data—debugging, lessons, and real-world insights.
Build, Create & Learn: A Maker's Journey Podcast - Episode 1
I’m so excited to share something I’ve been working on for some time behind the scenes: my brand-new podcast, Build, Create & Learn — A Maker’s Journey.